Question: Does anyone have the original driver and editing software for Lixiang barcode printer CP-2140

Answer: A: Just download the attached printer driver and install it.

Question: How to set up Lixiang cp-2140m barcode printer

Answer: A: How to set what to print? To have specific print content,

Question: Lixiang ARGOX CP-2140M barcode printer setting problem

Answer: A: First check whether the label format size setting is correct, whether it is the same as the real object, then measure the paper, and then print after measuring the paper, there should be no problem.

Question: How does ARGOX CP-2140 Label Barcode Printer measure paper to print a small...

Answer: A: That is the printer's self-test paper. You need to do a check on the paper. Many people who buy barcode printers will have such problems.

Question: Argox CP-2140 double flashing light

Answer: Answer: The paper is not installed properly. After checking that the installation is complete, perform a paper measurement calibration action: press the Feed key to turn it on after the machine is turned off, and release the Feed key immediately after the label paper moves.

Question: urgent! Standing elephant cp2140 printing clothing tag is not clear, please help

Answer: Answer: First of all, it is recommended to try to deepen the printing density. Click the "Options" in the file printing properties to adjust the density, and deepen the printing to see the effect. If it still does not work, it is recommended to replace the ribbon with a better quality.

Question: Problems with the use of argox cp2140 barcode printer

Answer: A: The reason why the power light and the ready light flash at the same time: the printer cannot find the label gap. Solution: Do a paper test (paper detection), and you can find the operation in the manual for the specific operation method. The problem will definitely be solved.

Question: argox cp2140 keeps flashing when booting up

Answer: Answer: Landlord, ① Please confirm that the consumables: label paper and ribbon are installed correctly; ② Try to restore the factory: Turn on the power of the printer and wait for more than 5 seconds; When ready, press and hold the key until the "READY" and "POWER" indicators The lights go out one by one; when the two indicators light up again, release the keys.